List of Accepted and Rejected Abstracts


The following are the list of accepted and rejected abstract as on date 19th October 2017
The list of abstract will be updated regularly
Please refer your User ID and Paper ID for all communications
Sr. No. User ID Paper Id Title of Abstracts
1 13 314 Innovative Techniques of Drag Reduction over Blunt Bodies at varied Angles of Attack in Supersonic Flow
2 14 642 Finite element approach for a parametric study on vibration response of a functionally graded shaft using temperature dependent material properties
3 17 339 Experimental Dynamic Response Analysis of Delaminated FRP composite Beams
4 21 655 Performance Evaluation of Jigsaw Machine With Kinematic and Stress Analysis
5 22 323 NUMERICAL SOLUTION OF STEADY INCOMPRESSIBLE FLOW IN A LID-DRIVEN CAVITY USING ALTERNATING DIRECTION IMPLICIT METHOD
6 28 358 Static analysis of composite boring bar using FEA
7 29 438 Micro-Mechanical Analysis of Piezo-Fiber Composites through Functional Analysis
8 32 435 Nonlinearity identification of a breathing cracked cantilever beam using Proper orthogonal Decomposition based Reduced Order Modeling
9 33 396 Multi-scale simulation of elastic waves containing higher harmonics
10 34 315 "Stochastic frequency response function analysis of functionally graded plates "
11 35 564 Effect of Length of Vortex Generators on the Overall Performance of a Transonic Axial Compressor Stage
12 36 316 Nonlinear active vibration absorber by time delay acceleration feedback
13 38 319 Active damping of structural vibration using porous ferroelectric ceramic
14 40 630 Numerical prediction of residual stresses and distortions in GMA welding of thin aluminium alloy plates
15 42 318 Bending and Free Vibration Analysis of Carbon Nanotube Reinforced Composite Spur Gear (CNTRCG) Using Finite Element Method
16 42 547 Damage Analysis of Fiber Reinforced Composite Plates
17 42 548 Bending and Free Vibration Analysis of Carbon Nanotube Reinforced Composite Spur Gear (CNTRCG) Using Finite Element Method
18 44 354 Diffusion induced stress in a cylindrical particle-binder system
19 46 382 Computational Investigation of Reynolds Number Effects on the Calibration of a Hemi-Sphere Four Hole Probe
20 48 637 Strength and Crack Growth Computation for Various types of Stringers on Stiffened Panels using XFEM Techniques
21 50 623 A phenomenological model for hyper-elastic material under deformation
22 52 360 On the Use of a Seven Hole Probe as a Six Hole Probe
23 52 498 Comparison of Single Hole, Two Hole and Four Hole Probes for Three-Dimensional Flow Measurements
24 52 499 Survey of Available Techniques for High Speed Turbomachinery Testing
25 53 431 An experiemental analysis of premixed coaxial isothermal and reacting swirling jet using 2D-PIV method
26 54 580 Stagnation and Static Property Correlations for Equilibrium Flows
27 55 570 Effect of skewness on stochastic natural frequency of sandwich plates
28 55 571 Effect of skewness on stochastic natural frequency of sandwich plates
29 58 359 CFD Simulation of Hypersonic Shock Tunnel Nozzle
30 59 366 A DNS Study of Bulk Flow Characteristics of a Transient Diabatic Plume that Simulates Cloud Flow
31 60 581 Laser spallation: A novel technique to evaluate thin layer interface strength
32 61 421 Supersonic underexpanded jet impingement over axisymmetric jet deflector
33 65 330 Investigation of heat transfer from satellite cluster of cylinders at Subcritical Reynolds number
34 66 331 COMPARATIVE STUDY OF 3-DOF STRAIN GAUGE FORCE TRANSDUCER USING FEM
35 68 332 Effect of stepped bottom on the efficiency of the Oscillating Water Column using CFD
36 69 340 Comparison of standard and staggered conic fins of heatsinks for forced convection microelectronics application
37 70 624 Determination of hardness for cone indentation to a semi-Infinite block for various cone angles and friction parameters by Numerical Slip-Line Field Technique
38 71 350 Miscible fluids interaction in microchannels in presence of the obstacles
39 72 334 Simplified Theory for Long Underground Cylindrical Storage Tank
40 74 389 Ignition of Hot Particles with Vaying Diameter and Temperature
41 75 335 Transverse-only vibrations of a rigid square cylinder
42 77 429 Steady flow past two square cylinders in tandem
43 78 373 A Micromechanical study of Fibre-Reinforced Composites with uncertainty quantification and statically equivalent random fibre distribution
44 79 356 Supersonic Nozzle Design using method of characteristics
45 80 336 A modified higher order zigzag theory for stress analysis of composite laminates
46 81 337 Comparative study of Biocomposite and synthetic FRP composite with experimental verification
47 83 601 A New Robust Flux Limiter
48 85 405 NURBS-enriched contact isogeometric element for adhesive contact problems
49 86 383 Effect of delamination on stiffened and un-stiffened shell-A comparative study
50 87 73 An Experimental Validation of Numerical Post-Stall Aerodynamic Characteristics of a Wing
51 88 646 Energy harvesting from vibration using IPMC taper cantilever beam
52 94 343 Effect of rigid buffel on the dynamic response of rectangular tank
53 95 342 Rapid Large Amplitude Maneuvers for an Asymmetric Combat Aircraft: A Single Loop Nonlinear Control Scheme
54 96 400 Numerical implementation of phase transition based constitutive model for 2D and 3D SMP structural elements
55 97 344 Wind pressure distribution on rectangular plan tall building due to variation in height of interfering buildings
56 99 660 Free vibration analysis of laminated composite plates and shells subjected to concentrated mass at the centre
57 101 346 "AERODYNAMIC DESIGN EXPLORATION OF COMPRESSOR CASCADE FOR BETTER DESIGN "
58 102 495 Free vibration analysis of fiber metal laminated plates
59 104 408 Response Surface Method for Structural Analysis with Imprecise Uncertainties
60 106 397 Instabilities in granular medium due to explosions
61 108 348 Tapered Viscoelastic Rayleigh/ Euler- Bernoulli beam finite element for rotor dynamic analysis
62 109 349 On the order of accuracy analysis of SDWLS method
63 111 352 "Dynamic analysis of laminated composite plates using Finite Element Method "
64 113 361 STABILITY ANAYSIS OF CORRUGATED STRUCTURES FOR MORPHING WING AIRCRAFT
65 114 377 Effect of proof masses on composites piezoelectric energy harvester with variable mounting positions
66 115 641 Time-OptimalConvergenceofFixed-WingUAVstoaCircularPath inSteadyWind
67 116 357 Numerical Analysis of Rayleigh Step Bearing under Thin Film Lubrication using PMD as an improved method for Direct Iterative Approach
68 117 520 Non-polynomial zigzag theory for the static and buckling analysis of laminated composite and sandwich plates
69 118 378 HDMR Based Finite Element Model Update in Structural Damage Identification
70 119 469 Finite-element multi-point impact performance functionally graded turbo-machinery blades
71 120 628 Buckling Analysis of Thick Isotropic Shear Deformable Beams
72 123 386 Experimental Investigation of Evolution of Instabilities in Pipe Flow
73 125 364 Effects of Injector Nozzle Geometry on Engine Parameters for a Diesel Engine Fueled with Preheated Pure Biodiesel
74 126 369 Dynamics of axially functionally graded nonuniform beam with geometric nonlinearity
75 127 365 A Comparative Evaluation of Three Actuation Methods for Telescopic Span Extension of HALE UAVs
76 128 381 Shock train dominated confined supersonic cavity flow
77 129 368 AshockstableandcontactpreservingconvectivepressuresplitRiemann solverforcomputationofcompressiblehighspeedflows
78 131 436 Effect of air-fuel ratio on the performance and emission characteristic of a biogas fuelled spark ignition engine
79 132 477 Numerical Analysis of Internal Flow Field of a Mixed Flow Compressor Impeller
80 133 384 Enhanced exploitation of long endurance UAV’s electro-optical payload for improved surveillance
81 134 370 Spectral finite element for dynamic analysis of piezoelectric laminated composite beams
82 136 371 Prediction of interlaminar stresses in thin pretwisted and delaminated composite strip
83 137 635 A study on the wrinkling characteristics of NBR material
84 141 374 Obtaining exact modal parameters by removing effects of probe and exciter using experimental modal analysis
85 142 440 Comparative study of mode I fracture property of conventional concrete and cementitious composite material
86 143 375 Large-eddy Simulation of Shock Train in Supersonic Diffuser Flows
87 145 379 An Efficient Metamodelling based Robust Design Optimization of Structure under Stochastic Extreme Wind Load
88 146 380 Dynamic Response of Stiffened Plates Subjectd to Underwater Blast Loading
89 147 399 Effect of void shape and orientaton, and material anisotropy on the fracture of AA7075
90 151 654 Optimal path planning for fixed-wing UAVs in 3D space
91 154 390 Coordinated Path Planning and Simultaneous Rendezvous of UAVs
92 155 391 Modeling of Fuel Reactor in a Chemical Looping combustion Process by using CFD
93 156 392 MMOC: A novel idea for fully expanded flow in supersonic nozzles
94 157 617 Stagnation Point Transient Heat Flux Measurement Analysis from K-type and E-type Coaxial Thermocouples
95 158 393 IR signature studies of serpentine nozzle with and without aft-deck
96 159 455 Aeroelastic studies of a double wedge airfoil in hypersonic flow regime
97 160 394 Effect of Graphite particulates reinforcement on the mechanical behaviour of glass fiber epoxy composites
98 161 482 Effect of material constants on performance of bimorph energy harvester
99 162 471 First Ply Failure Study of Laminated Composite Conoidal Shells using Geometrically Nonlinear Formulation
100 163 523 Transient Heat Flux Measuremnt Analysis with K, E and J-type fast response thermocouples
101 165 404 Computational Investigation of Drag Reduction by means of Two-Dimensional Roughness on the Suction Surface: Effect of Position
102 166 407 Analysis of transformed sixth order polynomial curve for the contraction of Wind tunnel by using OpenFOAM
103 168 648 Fracture characterization of composite using high dimensional model representation based cohesive zone model
104 169 412 Numerical Simulation of Supersonic flow seperation in Over Expanded Planar de-Laval Nozzle
105 172 696 CFD Modelling of Scramjet Combustor
106 173 418 A Semi-Analytical Adaptive Sparse Surrogate based Approximation Model: Application in Non-Linear Stochastic Dynamics and Vibration Control
107 178 423 Active structural vibration control under seismic excitations
108 179 425 A GPU-based simulation of nonlinear finite element problems
109 180 428 Micro Particle Image Velocimetry Studies on Flow of Suspensions through Bifurcating Channels
110 182 250 A numerical study on the behaviour of steel beam-concrete slab composite structure
111 183 432 Different Gaseous Fuels under Variable Compression Ratio and Spark Location in Spark Ignition Engine: The Comparative Performance Study
112 184 433 Electrodeposited Functional Polymer Nano-composites (EFPNC) – Futuristic Materials for Aerospace and Electronic Applications
113 185 437 Gravity Wave Interaction with Multiple Submerged Porous Structures on Impermeable Multi-step Bottom
114 187 644 Fatigue Crack Growth Simulation In Functionally Graded Materials Using Level Set Methodology In Framework Of Element Free Galerkin Method
115 191 444 Fatgue Life Assessment of an Existing Railway Bridge in India Incorporating Uncertainty
116 192 496 Determination of Coupling Factors for Bolted Plates using Finite Element Analysis
117 194 4 Numerical simulation of flow over a re-entry crew module
118 199 695 Experimental study of regression rate augmentation using vortex generator in a hybrid rocket motor
119 200 673 Numerical Simulation Of Isothermal Crack In Functionally Graded Material In Weak Discontinuity Domain Using Element Free Galerkin Method
120 204 668 Numerical Simulation of Acoustic Emission Waveforms Generated by Tension and Shear Cracks in RCC beams
121 205 61 TURBULENT FLOW OVER A TRAIN OF K-TYPE ROUGHNESS
122 206 205 Numerical Study of the Blade Sweep and Lean Effects on an Axial Supersonic Impulse Turbine Flow Field and Performances
123 211 226 Modeling of Large Elasto-Plastic Deformations in Bi-material Components by FEM
124 212 647 Hand Held FFT ANALYSER FOR MODEL ANALYSIS
125 213 634 Effect​ ​of​ ​impact​ ​angle​ ​on​ ​the​ ​ballistic​ ​performance​ ​of​ ​Aluminum and​ ​Polycarbonate​ ​targets
126 216 247 Design and feasibility analysis of hot air tethered aerostat system
127 218 675 Experimental and numerical analysis of large elastic-plastic deformation of mild steel
128 219 91 Actuator Modeling for Electro-magneto-hydrodynamic Flow Control Studies
129 220 10 Numerical simulation of flow over a re-entry crew module
130 226 535 Differential Evolution for Regular Orbit Determination
131 228 37 Optimal Design Technique and Economical Assessment of Stand-Alone Small-Scale HAWT for Indian Scenario
132 228 576 Optimal Design Technique and Economical Assessment of Stand-Alone Small-Scale HAWT for Indian Scenario
133 229 639 Finite Element Vibration Analysis of Skew Sandwich Plate
134 231 659 DYNAMIC STABILITY ANALYSIS OF AN PARABOLIC TAPERED RECTANGULAR BEAM SUBJECTED TO PERIODIC EXCITATION WITH VARIABLE THERMAL GRADIENT
135 232 49 Study on Parametric Instability of an Asymmetric Tapered Sandwich Beam Configuration by Computational Method
136 233 52 Wind Fragility Assessment of RC Chimney considering Temperature Effects
137 234 55 Active Aeroelastic Wing Technology – A Preliminary Study
138 235 223 Study on real-time engine model for performance verification of turbofan engine EECU in the normal operation phase
139 239 663 LIQUID SLOSH SIMULTION STUDIES
140 243 106 Development of Coupled Dual grid Level Set and Lattice Boltzmann based Multi-Phase Flow Solver
141 244 94 Numerical Simulation of Magnetic Pulse Welding Process for Aluminum Tubes to Steel Bars
142 245 109 "SURVEY OF NOVEL FILM COOLANT INJECTOR CONFIGURATIONS OF GAS TURBINE BLADES "
143 245 702 3D Numerical Investigation of the Tandem Compressor Cascade with varying Sidewall Gap Distance
144 246 214 POD Analysis of Flow Past Two Circular Cylinders in Tandem Arrangement
145 247 112 Applicability of Tricycle Modeling Method in the Simulation of Aircraft Steering Systems
146 248 115 Characterisation of flow structures for a surface interacting plane turbulent jet
147 249 124 Analysis of Adhesive Layer Strain Field in a Single Tapered Scarf Repaired CFRP laminate using Digital Image Correlation
148 250 632 Influence of micromechanical properties on thermomechanical response of laminated composite plates
149 252 133 Quasi Steady Stall Modelling of Aircraft using Least-Square Approach
150 254 704 Open channel turbulent flow in the presence of surface wave
151 257 488 Free vibration and stress analysis of laminated box beam with and without cut-off
152 258 256 Numerical study on the hydrodynamic performance of S1210 hydrofoil used in current turbines due to the presence of Tube slot
153 260 181 Nonlinear Analysis of Skew Plates on Winkler Foundation using Element Free Galerkin Method
154 261 190 Effect of delamination on vibration characteristic of laminated composite plate
155 263 295 Identification of Nonlinear Dynamical Systems using HDMRKalman Filter
156 264 540 Study of the Effect of Heat Source Position on Thermo-Acoustic Instability boundaries of Rijke tube
157 265 304 Computational Investigation of Drag Reduction by means of Two-Dimensional Roughness on the Suction Surface: Effect of Position
158 266 199 Characterization, Micromechanical Analysis and Prediction of Effective Properties of Prepreg Based Discontinuous Composite
159 267 626 Free vibration analysis of functionally graded porous circular arch in thermal environment
160 269 658 Experimental Modal Analysis of a Cantilevered Laminated Composite Plate
161 270 241 PREDICTION OF ECCENTRIC JET NOISE DIRECTIVITY USING LINEAR STABILITY ANALYSIS
162 271 253 Wave propagation in a delaminated thin pre-twisted anisotropic strip
163 273 692 Micromechanical based global sensitivity analysis of displacement and load sharing for multi-bolt composite bolted joint
164 274 271 The Effects of Micromechanical Parameters on the Bending Behaviour of Glass-epoxy Laminated Composite Shells
165 275 620 Thermo-mechanical bending analysis of skew FGM laminated plate
166 276 292 Effect of Geometric Imperfection on the vibration response of shear deformable functionally gradient plates
167 277 298 Mixing Characteristics of Nozzles Integrated with Ultra- High Frequency Actuators
168 281 448 STUDY OF FLOW CONTROL DEVICE FOR SHIP AIRWAKES
169 282 515 Dynamic responses of Bridge and Vehicle for various Vehicle models
170 283 450 Turbulent characteristics of oscillatory flow over rough bottom
171 285 454 A computational model for VIV induced fatigue damage assessment of marine riser in current dominated locations
172 286 456 Wave propagation in a 2D nonlinear acoustic waveguide with a membrane
173 286 457 Wave propagation in a 2D nonlinear acoustic waveguide with a membrane
174 287 463 Vibration analysis using machine vision system
175 288 460 Sound radiation from a fluid-loaded perforated panel set in a baffle
176 289 640 Numerical investigation of flow through a rotating, annular, variable-area duct
177 290 490 Direct transfer-trajectory design to Jupiter using Iterative Pseudostate Technique
178 291 489 State estimation using filtering methods applied for Aircraft landing maneuver
179 292 470 Crashworthiness performance of Frusta Tube Structures against Eccentric loading
180 293 462 On Fatigue Crack Growth in Plastically Compressible Hardening Solids by Crack Tip Blunting
181 296 665 DESING OF AUTOMATIC PITCH CONTROLLER FOR HANSAIII AIRCRAFT TO ACCOUNT FOR SMALL PERTURBATION
182 296 476 DESIGN, FABRICATION, TESTING AND COST OPTIMIZATION OF MONOPROPELLANT THRUSTER
183 298 504 Hygro-thermo-mechanically induced fracture analysis of edge crack Piezomagnetic laminated composite plate using DCM
184 299 475 Effect of hydrogen functionalisation on 2D nanomaterials
185 301 486 Computational analysis of Heat Transfer enhancement in Fin and Tube Heat Exchanger using Rectangular Vortex Generators
186 302 555 Static and Dynamic Characterization of Glass Fiber Reinforced Polypropylene Composite and its Application for Horseshoe
187 303 492 Aerodynamic Parameter Estimation using LASSO Regression Method from Flight Data
188 305 497 Research Review on Variation in VARTM Experimental Setup Development
189 309 501 Cold Expansion of Elongated Hole: A Realistic Finite Element Simulation
190 310 509 Numerical investigation of crushing behavior of conventional and reinforced honeycomb structure against in plane loading
191 311 500 DevelopmentofM–DSMCforHypersonicflows
192 312 511 Effect of module on wear resistance of high contact ratio spur gears through optimized fillet stress
193 313 505 Effect of boundary conditions and excitation locations on power flow of vibrating beams
194 314 503 Mixed mode stress intensity factor of edge crack laminated composite plate in hygrothermal environment using XFEM
195 315 516 Computational Fluid Dynamic (CFD) analysis of using a SiC based nanofluid as an automotive radiator coolant
196 321 536 Methodology for analysing two dimensionally periodic phononic crystals for elastic wave attenuation and guiding
197 344 568 Unusual extension-torsion-inflation coupling in intrinsically twisted elastic tubes
198 345 530 Computational Study of Air Flow Interactions and Drag Reduction Techniques in Vehicle Platoons
199 347 538 Estimation of multidimensional demand curves using extreme value analysis
200 348 543 Effect of eccentricity on stochastic dynamic characteristics of hydrodynamic journal bearing
201 349 533 A note on dynamic initialization of numerical model for plankton dynamics in Sundarbans Estuarine Systems, India
202 351 666 Dynamic Fiber Bundle Models with Local Load Sharing
203 352 638 Energy harvesting using piezoelectric
204 360 537 Effect of particle loading on regression profile, igntion and flame characteristics of boron laden nanofuel droplet
205 361 553 Two-dimensional analysis on Rayleigh Benard convection in a square cavity with adiabatic and isothermal sidewall conditions
206 362 546 Obstacle Avoidance for Unmanned Air Vehicles Using Monocular SLAM with Chain Based Path Planning
207 364 549 Vibration Analysis of Piezoelectric Laminated Composite Plate Using Inverse Hyperbolic Shear Deformation Theory
208 365 551 Combustion Characteristics of Boron-HTPB Based Solid Fuels for Hybrid Rocket Applications
209 366 550 Study on freeze drying of water and milk in a spherical shell
210 368 560 Effect of amplitude and oscillation frequency on pitching airfoil propusion and flow periodicity
211 369 554 Numerical and Experimental study of sublimation dehydration of water
212 370 556 CFD analysis of Centrifugal Pump Impeller and effects of Impeller’s Geometry on the Centrifugal Pump Performance
213 371 557 CFD analysis of centrifugal pump performance with different impeller geometries
214 396 563 Effect of Body Flap on the Aerodynamics of RLV-TD at Subsonic Mach Number
215 404 569 Lattice Boltzmann computation of natural convection in a square porous cavity with non-uniform wall temperatures
216 405 688
217 409 575 Entropy generation analysis of an energy generating plate dissipating heat into its surrounding fluid medium
218 412 582 Force estimation on a clamped plate using a deterministicstochastics approach
219 417 583 NUMERICAL INVESTIGATION OF THE EVACUATION EFFECT IN THE EXPANSION DEFLECTION NOZZLE
220 418 618 Doubly coupled vibration and dynamic instability analysis of thin-walled columns
221 419 590 Failure Analysis of Circular Composite Patch Adhesively Bonded on Damaged Carbon Fiber Reinforced Polymer Panel
222 420 664 Novel Solar Energy Electrical Generator
223 423 604 Underwater Time Delay Estimation with Maximum Length Sequence Signals and Rayleigh underwater modeling
224 426 605 Fluid-structure interaction dynamics of a flexible foil in low Reynolds number flows
225 428 645 Effect of different fibers on compressive strength of self compacting concrete at elevated temperature
226 431 610 Generation of wing-tip vortices by flapping rigid plate, optimization of PIV measurements and identification of vortices using various algorithms
227 432 615 Damage Detection of Laminated Composite Shells using Unified Particle Swarm Optimization
228 433 643 Dynamic Analysis of Composite Cylinders using 3-D Degenerated Shell Elements
229 434 614 A new hybrid unified particle swarm optimization technique for damage assessment from changes of vibration responses
230 436 616 Influnce of thin rotating axial rod and axial magnatic field on lid driven swirling flow: a comparitive study
231 459 683 Semi-active Control of a Three Storey Building Structure
232 470 684 Nonlinear Vibration of Pre and Post Buckled Composite Shells under Hygro-thermal Environment
233 475 676 Finite Element Analysis to Determine Residual Stress in Electron Beam Welding of CuCrZr Alloy Plates and Experimental Validation
234 477 677 Design of Powered Ankle Prosthesis for Replicating Natural Gait Cycle of Human Locomotion
235 478 678 Kinematic Analysis of Legged Mobile Manipulator
236 481 679 Prediction of Joint Torque and Power Consumption for Sit-toStand Motion of Patients havng Different Heights and Weights using Feedforward Artificial Neural Network
237 483 680 A Novel Directional Crossover Operator for Real-Coded Genetic Algorithm
238 484 681 Comparison of Heat Source Models in FEM-based Analysis of Electron Beam Melting of Steel Plate
239 486 686 A DETAIL STUDY ON HYSTERETIC SYSTEMS USING THE APPLICATION OF FORCE AND BASE EXCITATION
240 487 687 Experimental and Numerical study of Magnetorhelogical damper using Boucc-Wen model
241 493 705 CFD investigation of pitch-up in a Transonic regime

Rejected Abstracts
Sr. No. User ID Paper ID Title of Abstracts
1 121 434 Experimental Study of Rapidy Varied Flow in Horizontal Prismatic Channel:Relative Specific Energy
2 122 430 Numerical Analysis of Flow over Wind Turbine using Moving Mesh Technique
3 170 415 No Abstract Title. Insufficient content
4 238 502 NOVEL METHOD OF USING WIND TUNNEL BY REDUCING THE WALL CORRRECTIONS
5 238 682 NOVEL METHOD OF ENERGY GENERATION USING GRAPHENE COMPOSITE MATERIAL GREEN HOUSES ON MARS
6 254 145 Open channel turbulent flow in the presence of surface wave
7 405 567 No Abstract Title. Insufficient content
8 421 690 Various Shear Deformation Theories for Buckling Analysis of Laminated Composite Plates Reinforced by Single-Walled Carbon Nanotubes